Start with the meter
Shut off every faucet and appliance. Find your water meter, usually in the basement near the street side or in a pit outside. Look for a small dial or a triangle that spins when water moves. If it turns with everything off, water is flowing through a leak. Write the number, wait an hour without using water and read it again.
If the number changed, the leak is real. If the meter stays still, the high bill may come from a billing error, a rate change or a seasonal use such as filling a pool or watering a lawn.
The usual suspects
| Source | How to check |
|---|---|
| Running toilet | Drop food coloring in the tank, wait 15 minutes and see if color reaches the bowl |
| Dripping faucet or shower valve | Look and listen. Check under sinks for dampness |
| Water heater | Look at the base for water and rust. Check the relief valve line |
| Washing machine and dishwasher hoses | Pull the unit out and check the connections |
| Underground service line | Meter turns with every fixture off and nothing wet inside |
| Irrigation lines | Check valves and sprinkler heads outdoors |
A toilet leak can waste many gallons a day without any sign. It is the first check, because it is cheap to fix.
Leak damaged a wall or floor?
Call the 24/7 line. We find the wet area and dry it.
When the leak is inside a wall or under a slab
Sometimes the meter turns and you find no wet spot. Water may be leaking inside a wall, under a floor or beneath a slab. Warm spots on a floor, a damp smell, cracked paint or the sound of running water at night point to it. A plumber can use acoustic listening gear or pressure tests to locate the leak. A thermal camera and moisture meter map the damage.
Slab leaks need particular care. See our slab leak page for signs. For leaks in walls, see our wall and drywall page.
What to do when you find it
- Close the nearest shutoff, or the main valve, to stop the flow.
- Take photos of the damage and the leak source.
- Call a plumber to fix the line or fixture.
- Call a restoration company if walls, floors or ceilings are wet.
- Call your utility to ask about leak adjustment policies.
Some utilities offer a billing adjustment after a documented leak. Ask yours, and keep the plumber's invoice and your meter readings.
Reading the bill itself
Look at the usage line, not just the total. Compare this period with the same months last year, because summer use can run higher for lawns and pools. Check that the meter reading was actual and not an estimate. If your bill is based on an estimate, a corrected reading can change the number. Call the utility if the numbers do not make sense.
Leak sensors and shutoffs
Small battery-powered sensors that beep when they touch water are inexpensive and useful under sinks, behind toilets, beside water heaters and next to washers. Some smart shutoff valves close the main supply when they detect a leak. Whether you add one or not, know where the main valve is, test it once a year and label it for everyone in the house.
Why small leaks add up
A toilet flapper that does not seal, a faucet that drips and a pinhole in a pipe can each run all day and all night. Over a month, even a slow leak can account for a large share of the bill. The same leaks soak materials slowly, which is how a wall or floor can be ruined without a single dramatic event.
What to tell the plumber
- When the bill went up and by how much.
- Whether the meter turns with everything off.
- Any wet spots, warm floors or noises you have noticed.
- Whether you have a slab, crawl space or basement.
- Whether you have already checked the toilets.
Seasonal bill changes versus leaks
Not every jump is a leak. Filling a pool, watering a new lawn, a houseguest stretch or a change in billing period can raise usage. A leak looks different. Usage stays high every day, including at night and when nobody is home. Compare daily readings over a few days if your utility provides them, or read the meter yourself in the morning and the evening.
A leak between the meter and the house
A broken service line can leak outside, where you never see it, and soaked ground or a soft spot in the lawn may be the only sign. Ask your utility who is responsible for the pipe between the meter and the house. A plumber can test it and tell you whether it needs repair.
Public water, private wells and your bill
Not every home near Keene has a water bill. State municipal profiles list public suppliers such as Marlborough Water Works for Marlborough and Walpole Water for Walpole, while homes in Westmoreland rely on private wells. A well owner has no bill to show a leak.
Instead, watch for a pump that runs more often than usual, a pressure tank that cycles quickly or a higher electric bill. Those are the well owner's version of a spike.
More on sudden water bill jump
How much water can a running toilet waste?
Quite a lot over a month, though the amount varies by toilet. The dye test takes minutes.
Will my insurance cover the leak itself?
Policies often cover sudden damage but not the repair of the failed part. A gradual leak may be excluded. Ask your insurer.
Should I shut off the main water while I am away?
For a long absence in winter, many people do, especially in cold weather when pipes can freeze. Ask a plumber about draining lines.
Who finds a leak under a slab?
A plumber with leak detection gear. We dry the damage afterward.
Call (603) 550-7813 about sudden water bill jump.
